Nov. 12, 2026
!
When I explain What Is Single Jersey Fabric? Structure, Properties, and Common Uses, I describe a lightweight weft-knit fabric made on one needle bed. It has a smooth face, a looped back, natural crosswise stretch, and common fiber options including cotton, polyester, viscose, modal, elastane, and blended yarns. This construction is widely used for T-shirts, underwear, babywear, sleepwear, casual apparel, and lightweight sportswear.
Single jersey fabric is popular because its looped structure combines softness, flexibility, air permeability, and a fluid drape. However, the same construction can produce edge curling, shrinkage, spirality, lower dimensional stability, or reduced opacity when the fabric is too light. I therefore recommend evaluating fiber composition, GSM, stretch recovery, finishing, and test results before approving a fabric for production.
Single jersey fabric is a weft-knitted material formed by one set of needles working in a single needle bed. Each needle creates a vertical column of knitted loops, producing a smooth technical face and a reverse side with visible loop formations. Unlike woven fabric, which uses intersecting warp and weft yarns, single jersey gains stretch from the shape and movement of its knitted loops.
The fabric normally stretches more across its width than along its length. Its exact behavior depends on yarn count, knitting gauge, loop length, GSM, fiber type, elastane content, and finishing treatment. A 100% cotton single jersey may feel soft and breathable but recover more slowly after stretching, while a cotton-elastane version may provide 10% to 30% greater practical extension depending on specification and test method.
Single jersey can be produced from combed cotton, carded cotton, polyester, recycled polyester, viscose, modal, organic cotton, or blended yarns. Common commercial weights range from approximately 100 GSM for lightweight lining or summer garments to 220 GSM or more for heavier T-shirts and casualwear. For most basic T-shirts, I usually compare fabrics between 140 and 190 GSM before considering the final garment fit, color, opacity, and finishing requirements.
The manufacturing process begins with yarn selection. The supplier identifies the fiber composition, yarn count, twist, strength, and color requirements before feeding the yarn into a circular knitting machine. Machine gauge and loop length determine the surface appearance, fabric weight, stretch, and thickness.
During knitting, needles form successive rows of loops from one yarn feed system. The machine creates a continuous tubular fabric or a specified open-width construction, depending on the equipment and finishing route. Because only one needle bed forms the fabric, the face and reverse side have visibly different structures.
After knitting, the fabric may undergo scouring, bleaching, dyeing, printing, compacting, softening, brushing, mercerizing, or moisture-management treatment. Compaction can reduce residual shrinkage, while elastane blending can improve stretch recovery. I recommend requesting the greige specification and finished specification separately because dyeing and finishing can alter GSM, width, shrinkage, handle, and shade.
A practical production sequence includes:
The main single jersey fabric properties result from its one-sided loop structure. I evaluate the following characteristics when selecting material for clothing production.
| Property | Typical effect in garments | Main factors |
|---|---|---|
| Softness | Improves next-to-skin comfort | Fiber type, yarn quality, softener |
| Breathability | Supports warm-weather comfort | Fiber absorption, GSM, loop density |
| Stretch | Helps movement and fit | Loop length, elastane, finishing |
| Drape | Creates a fluid garment shape | GSM, yarn type, knit density |
| Curling | May affect hems and cutting | Single-bed structure, finishing, edge treatment |
| Shrinkage | Changes finished measurements | Fiber, heat, washing, compaction |
| Durability | Determines service life | Yarn strength, GSM, pilling resistance |
Cotton, modal, and viscose single jersey generally provide a soft hand feel because their fibers or yarn surfaces are suitable for close-contact garments. Polyester can also be engineered for softness through microfiber construction and finishing, but untreated polyester may feel less absorbent. I assess softness after laundering because some softeners create an initial surface effect that declines after repeated washing.
Single jersey stretches naturally because its loops can open under tension. Crosswise extension commonly exceeds lengthwise extension, but excessive stretch without recovery can produce bagging at necklines, elbows, waistbands, or seat areas. For fitted garments, I specify an extension percentage and recovery requirement rather than relying only on the word “stretchy.”
A useful inspection method is to mark a measured section, extend it to the intended working tension, release it, and record the remaining length after one minute and after thirty minutes. For example, a fabric that extends from 10 centimeters to 13 centimeters has 30% extension. If it remains at 10.5 centimeters after recovery, its immediate residual deformation is 5%.
Single jersey is often breathable because its knitted loops create pathways for air movement, but breathability is not determined by structure alone. Fiber absorbency, fabric density, finishing chemicals, and GSM can produce different results. A 110 GSM polyester jersey and a 180 GSM cotton jersey may both be called breathable, yet they will provide different moisture and heat experiences.
Drape generally improves as the fabric becomes lighter and more flexible. Low-GSM viscose or modal jersey can create a fluid silhouette, while compact cotton or polyester jersey can hold more body. I match drape to the garment pattern because a fabric that works for a relaxed T-shirt may look unsuitable in a structured dress or fitted sports top.
The cut edges of single jersey may curl toward the face or reverse side because of loop tension. This can complicate cutting, sewing, hemming, and panel alignment, especially when the fabric has a lightweight construction. Compaction, tubular handling, stabilizing finishes, and suitable cutting procedures can reduce the effect, but they do not remove the structural tendency completely.
Shrinkage depends on fiber type, knitting tension, finishing, and washing conditions. For production approval, I prefer a documented dimensional-change result rather than a general claim. A buyer may set a target such as no more than 3% lengthwise and 3% widthwise change after the specified wash test, although the acceptable limit should reflect the garment pattern and brand standard.
The most common single jersey fabric uses are T-shirts, tank tops, underwear, baby clothes, pajamas, sleepwear, casual dresses, lightweight skirts, loungewear, and base-layer garments. Its softness and flexible construction make it suitable for fabric that touches the skin. Its weight range also allows suppliers to develop both lightweight summer products and heavier everyday clothing.
For sportswear, polyester single jersey can support quick drying and color consistency, while elastane improves body movement and fit. Cotton is often selected for casualwear because it provides a familiar hand feel and moisture absorption. Modal, viscose, and blended fibers are used when the design requires a softer drape or a smoother surface.
Home textile applications include lightweight pillow covers, fitted accessories, sleep masks, soft furnishings, and certain reusable textile products. However, I would not select lightweight single jersey for applications requiring high abrasion resistance, rigid shape retention, or heavy structural support without adding reinforcement or changing the fabric construction.
I use an end-use matrix before choosing a single jersey fabric for wholesale knit fabric purchasing. GSM should be selected together with fiber and finishing because weight alone does not determine opacity, comfort, durability, or recovery. The following guide provides a practical starting point rather than a substitute for laboratory approval.
| Garment application | Suggested GSM range | Suitable composition | Key selection priority |
|---|---|---|---|
| Summer T-shirt | 130–160 GSM | Cotton or cotton-polyester | Breathability and opacity |
| Standard T-shirt | 160–190 GSM | Cotton, CVC, or cotton-elastane | Shape retention and pilling resistance |
| Babywear | 150–190 GSM | Combed or organic cotton | Softness, safety, and shrinkage |
| Underwear | 150–200 GSM | Cotton-elastane or modal-elastane | Recovery and next-to-skin comfort |
| Lightweight activewear | 140–180 GSM | Polyester-elastane | Drying speed and stretch recovery |
| Casual dress | 170–230 GSM | Viscose, modal, cotton blends | Drape and opacity |
| Loungewear | 180–240 GSM | Cotton, modal, or blended jersey | Comfort and dimensional stability |
For a small clothing business, I recommend ordering development samples in at least two GSM levels and washing both before approving the pattern. A 150 GSM fabric may look suitable on a roll but become too transparent in light colors. A 200 GSM fabric may improve coverage but increase garment weight, drying time, and material cost.
A reliable single jersey fabric quality checklist should include both visual inspection and measurable testing. I ask suppliers to identify the test method, conditioning environment, sample size, and acceptance limit for every result. Without these details, two test reports may appear comparable while measuring different conditions.
The core checks include:
For regulated products, I also request applicable chemical and safety documentation. Runli states that its textile manufacturing system supports testing and certifications including ISO management systems, BCI, GRS, OCS 100, SGS testing, OEKO-TEX STANDARD 100, GOTS, and OCS Blended Content Standard. Buyers should still request the certificate number, product scope, validity period, and matching laboratory report for the specific order.
Cotton single jersey is absorbent, familiar to consumers, and suitable for T-shirts, underwear, and babywear. Its trade-offs may include higher drying time, shrinkage risk, and reduced recovery when elastane is absent. Organic cotton can support a different sourcing objective, but certification and chain-of-custody documents should be verified for the purchased material.
Recycled polyester can improve drying speed, tensile performance, and color retention, making it suitable for sportswear and performance tops. It generally absorbs less moisture than cotton and may retain odor depending on wearer conditions and finishing. Viscose and modal provide smoothness and drape, but they require careful evaluation of wet strength, pilling, shrinkage, and production consistency.
Elastane is usually added in a small percentage to increase stretch and recovery. It can improve fit in underwear, fitted T-shirts, leggings, and activewear, but excessive heat, chlorine, or unsuitable finishing may reduce its service life. Blends often provide the most balanced result, although they can complicate recycling, fiber claims, dye matching, and end-of-life processing.
The difference between single jersey and interlock fabric begins with structure. Single jersey is formed on one needle bed and has a distinct face and reverse, while interlock uses two needle beds to create a more balanced double-knit construction. Interlock is generally thicker, smoother on both sides, more stable, and less prone to edge curling.
Single jersey usually offers lower weight, greater drape, and lower material consumption. Interlock generally provides better opacity, warmth, dimensional stability, and resistance to rolling edges. I select single jersey for lightweight T-shirts, underwear, and summer garments, while interlock is more suitable for premium basics, babywear requiring extra coverage, structured loungewear, and garments needing a smoother double-sided appearance.
| Factor | Single jersey | Interlock |
|---|---|---|
| Construction | One needle bed | Two needle beds |
| Surface | Smooth face, looped back | Similar appearance on both sides |
| Weight | Often lighter | Usually heavier |
| Edge behavior | More curling risk | More stable |
| Drape | More fluid | More structured |
| Warmth | Lower at equal fiber type | Higher at comparable weight |
| Common uses | T-shirts, underwear, summerwear | Babywear, premium basics, loungewear |
Yes, single jersey can be suitable for summer when the fiber, GSM, color, and finishing match the climate. Lightweight cotton, modal, or selected polyester constructions between approximately 110 and 160 GSM can support lower garment weight and increased air movement. Very low GSM may reduce opacity and durability, particularly in white or pale shades.
For summer clothing, I check breathability, moisture behavior, drying time, colorfastness, and transparency after washing. A loose garment made from 150 GSM cotton jersey may feel cooler than a tight garment made from 120 GSM polyester because fit and air circulation affect wear comfort. The correct choice is therefore based on the complete garment specification rather than GSM alone.
Care instructions should reflect the fiber blend and finishing method. Cotton single jersey commonly benefits from moderate washing temperatures, low mechanical stress, and controlled tumble drying or flat drying to limit shrinkage. Modal, viscose, and elastane blends may require gentler washing and lower heat because excessive temperature can affect shape and recovery.
I recommend testing the final garment, not only the fabric roll, because seams, labels, prints, and trims can change washing behavior. Avoid prolonged high heat when shrinkage or elastane durability is a concern, and follow the supplier’s measured dimensional-change data. For printed jersey, additional testing should confirm print adhesion, cracking, color transfer, and surface abrasion resistance.
When I evaluate a supplier, I look for evidence covering raw materials, knitting, dyeing, finishing, testing, and supply continuity. Runli presents an integrated textile operation covering yarns, grey fabrics, knitted and woven fabrics, dyeing, printing, warehousing, and related services. Its published company information states that the core team has 16 years of textile industry experience, supported by more than 3,000 textile machines and annual fabric capacity exceeding 100 million meters.
Runli also lists customization by yarn count, fabric weight, dyeing effect, and order scale, including small-batch trial orders and larger production programs. Its published manufacturing information includes 200,000 spindles, annual yarn capacity of 40,000 tons, and a five-member core research and development team. I would still confirm the exact machine gauge, finished width, GSM tolerance, minimum order quantity, lead time, and test protocol for each single jersey specification.
For clothing manufacturers comparing a single jersey fabric supplier, the most useful request is a technical data sheet linked to a physical sample and laboratory report. The request should state composition, GSM tolerance, width, color standard, shrinkage limit, spirality limit, pilling grade, stretch recovery, colorfastness grades, packing method, and inspection procedure. This approach makes supplier comparisons measurable and reduces the risk of approving a fabric based only on touch or appearance.
What Is Single Jersey Fabric? Structure, Properties, and Common Uses can be answered simply: it is a lightweight weft-knit fabric made on one needle bed, with a smooth face, looped reverse, natural stretch, and applications across everyday apparel. Its main strengths are softness, breathability, flexible fit, and adaptable drape, while its main risks include edge curling, shrinkage, spirality, pilling, and limited stability in lightweight constructions.
I recommend selecting single jersey by matching composition, GSM, stretch, recovery, opacity, and finishing to the garment’s end use. Cotton suits breathable casualwear, polyester supports sportswear drying performance, modal and viscose improve drape, and elastane enhances fitted recovery. Before bulk production, approve a sample only after testing shrinkage, spirality, pilling, opacity, colorfastness, and dimensional recovery against written limits.
Latest News
We can Provide Customized Services
The core members of the R&D team consist of 5 members, providing customized services, continuously optimizing the production process, enhancing fabric performance, and promoting product upgrades.
Navigation
Navigation
Contacts
Tel.: +86 181 5753 1007
E-mail: info@runliglobal.com
Add.: Room 4068, Building 4, International Trade Center (Middle District), Keqiao, Shaoxing, Zhejiang,China